Match the right saw with your job

The toughest job is a satisfied customer waiting to happen. RGC Construction has what you need for every job, every time.

Concrete Cutting Chainsaw

C150

  • The C150-8 with a 15” bar requires 8 gpm oil flow at 2000 – 2500 psi oil pressure, water flow of 2-1/2 gpm and 50 psi. The C150-8 weighs approximately 30 lbs.
  • The C150-8 with a 20” bar requires 8 gpm flow at 2000 – 2500 psi oil pressure, water flow of 2-1/2 gpm at 50 psi. The C150-8 weighs approximately 30 lbs.
  • The C150-12 with a 15 in” bar requires 12 gpm oil flow at 2000 – 2500 psi oil pressure, water flow of 2-1/2 gpm and 50 psi. The C150-12 weighs approximately 30 lbs.
  • The C150-12 with a 20” bar requires 12 gpm oil flow at 2000 – 2500 psi oil pressure, water flow of 2-1/2 gpm and 50 psi. The C150-12 weighs approximately 30 lbs.
  • The C150-12 with a 30” bar requires 12 gpm oil flow at 2000 – 2500 psi oil pressure, water flow of 2-1/2 gpm and 50 psi. The C150-12 weighs approximately 30 lbs.

C100

  • The C100 with a 15” bar requires 12 gpm oil flow at 2000 – 2500 psi oil pressure, water flow of 2-1/2 gpm and 50 psi. The C100 weighs approximately 23 lbs.

C50

  • The C50 with a 13” bar requires 8 gpm oil flow at 2000 – 2500 psi oil pressure, water flow of 2-1/2 gpm and 50 psi. The C50 weighs approximately 16 lbs.
  • The C50 with a 15” bar requires 8 gpm oil flow at 2000 – 2500 psi oil pressure, water flow of 2-1/2 gpm and 50 psi. The C50 weighs approximately 16 lbs.

Download Sell Sheet

Hydraulic Circular Saws

S14

The S14 Hydraulic Circular Saw has a 14” blade and a cutting depth of 5-1/4”. It requires 5 - 8 gpm flow at 2000 – 2500 psi oil pressure. The S14 runs at 4100 rpm with 8 gpm and 2500 psi input. It weighs approximately 28 lbs.

S16

The S16 Hydraulic Circular Saw has a 16” blade and a cutting depth of 6”. It requires 5 - 8 gpm flow at 2000 – 2500 psi oil pressure. The S16 runs at 2750 rpm with 8 gpm and 2500 psi input. It weighs approximately 39 lbs.

S20

The S20 Hydraulic Circular Saw has a 20” blade and a cutting depth of 7-1/2”. It requires 5 - 8 gpm flow at 2000 – 2500 psi oil pressure. The S20 runs 1830 rpm with 8 gpm and 2500 psi input. It weighs approximately 52 lbs.

S24

The S24 Hydraulic Circular Saw has a 24” blade and a cutting depth of 9-1/2”. It requires 5 - 8 gpm flow at 2000 – 2500 psi oil pressure. The S24 runs at 1455 rpm with 8 gpm and 2500 psi input. It weighs approximately 54 lbs.

TS14

The TS14 is a circular trench saw with 5-1/4” cutting depth. It requires 5 - 8 gpm flow at 2000 – 2500 psi oil pressure. The TS14 runs at 4100 rpm with 8 gpm and 2500 psi input. It weighs approximately 39 lbs.

Download Sell Sheet

Hydraulic Circular Flush Cut Saw

FS20

The FS20 Flush Cut Saw has a 20” blade and a cutting depth of 8”. It runs at 1830 rpm with 8 gpm and 2500 psi input. The handheld FS20 with guard and depth guide weighs approximately 45 lbs.

The FS20 with upright handle weighs approximately 67 lbs.

The FS20 with guard, depth guide and upright handle weighs approximately 91 lbs.

Download Sell Sheet

Download Manuals and Instructions

2019 Catalog

Construction

Download our 2019 Catalog

Download