Because You Need More Than Saws
Count on RGC’s Product Line for All You Need

Trash Pumps

Hydraulic Trash Pumps move debris, soluble and semi-soluble solids and gravel with ease and more efficiently than with other pumps.

PT300

The PT300 provides a pumping capacity of 475 gpm and a maximum lift of 100’. It operates at 7 - 11 gpm and 2000 psi with an open center. The discharge outlet is 3” with a Cam-Lock fitting. The PT300 is ideal for trash with semi-solids up to 3” in diameter and weighs approximately 30 lbs.

PT400

The PT400 provides a pumping capacity of 875 gpm and a maximum lift of 45’. It operates at 7 - 9 gpm and 2000 psi with an open center. The discharge outlet is 4” with a Cam-Lock fitting. The PT400 is ideal for trash, sludge, slurry and water and weighs approximately 59 lbs.

2” Hose

3” Hose

Water Pumps

Hydraulic Water Pumps can work in wet or dry conditions and allow you to remove water from damp sites more quickly than with electric without burning out the motor.

PW200

The PW200 provides a pumping capacity of 250 gpm and a maximum lift of 145’. It operates at 4 - 9 gpm and 2000 psi with an open center. The discharge outlet is 2” with a Cam-Lock fitting. The Pw200 is a water pump that weighs approximately 12 lbs.

PW250

The PW250 provides a pumping capacity of 275 gpm and a maximum lift of 145’. It operates at 4 - 8 gpm and 2000 psi with an open center. The discharge outlet is 2-1/2” with a Cam-Lock fitting. The PW250 is a water pump that weighs approximately 12 lbs.

PW300

The PW300 provides a pumping capacity of 500 gpm and a maximum lift of 120’. It operates at 7 - 11 gpm and 2000 psi with an open center. The discharge outlet is 3” with a Cam-Lock fitting. The PW300 is a water pump that weighs approximately 21 lbs.

Hydraulic Core Drills

Hydraulic Core Drills allow your crew to remove core holes of material without creating excess dust. Perfect for drilling a core to test the density of concrete or cutting holes for pipe installation. And with a powerful hydraulic motor, you’ll get more return on investment as the motor won’t burn out at the first challenging job.

CD616

The CD616 HydraCore Drill uses 6 – 16” core bits, has variable speed control and hose whips. It requires 8 – 15 gpm flow at 2000 – 2500 psi pressure. It provides 330 rpm at 8 gpm. The assembly includes an M2 Drill Stand with 42” mast and spacers with bolts included. It weighs approximately 158 lbs.

CD1824

The CD1824 HydraCore Drill uses 18 – 24” core bits, has variable speed control and hose whips. It requires 8 – 15 gpm flow at 2000 – 2500 psi pressure. It provides 200 rpm at 8 gpm. The assembly includes the M2 Drill Stand with 42” mast and spacers with bolts included. It weighs approximately 163 lbs.

Wrenches

7/16” Wrench

The 7/16” Impact Wrench is equipped with a Hex Head Quick-Change chuck and provides 400 ft-lb torque at 8 gpm. It requires 4 – 10 gpm flow at 1000 – 2000 psi pressure and weighs approximately 7-1/2 lbs.

7/16” Adjustable Torque Wrench

The 7/16” Adjustable Torque Wrench? is equipped with a Hex Head Quick-Change chuck and offers adjustable torque settings from 80 – 400 ft-lb. It requires 4 – 10 gpm flow at 1000 – 2000 psi pressure and weighs approximately 7-1/2 lbs.

3/4” Wrench

The 3/4" Impact Wrench has a 3/4" square drive, requires 4 – 12 gpm flow at 1000 – 2000 psi pressure and provides 1060 ft-lb of torque at 6 gpm and 2000 psi. It operates on an open- or closed-center system and weighs approximately 12-1/4 lbs.

1” Wrench

The 1” Impact Wrench is 1” square drive, requires 10 gpm flow at 2000 psi pressure and provides up to 2500 ft-lb of torque. It requires an open-center system and weighs approximately 24 lbs.

1/2” Drill

The 1/2" has a 1/2" chuck, variable speed and requires 4 – 8 gpm flow at 1000 – 2000 psi pressure. It operates on an open- or closed-center system and weighs approximately 6 lbs.

Flow Divider

Flow Divider with Hose Whips and Flush-Face Fittings

Adjustable output of 4-12 gpm.

Maximum input of 30 gmp and 3000 psi.

Hydraulic Hoses

Hydraulic Hoses provide freedom of movement, allowing you to move around a job site without having to move your HydraPak.

1/2” x 25’ pair of Extension Hoses with flush-face fittings weigh approximately 21 lbs.

1/2” x 50’ pair of Extension Hoses with flush-face fittings weigh approximately 38 lbs.

1/2” x 25’ Extension Hose with 3/4” return line, both with flush-face fittings weigh approximately 35 lbs.

Pair of 1/2” x 12” Hose Whips (for drills, impact wrenches, pole saws and hand chain saws) weigh approximately 2 lbs.

Pair of 1/2” x 12” Hose Whips (for pole tampers) weigh approximately 2 lbs.