Hydraulic Circular Saws

RGC HydraSaws

RGC Circular Saws

Cut floors and walls with equal ease. RGC Circular Saws utilize heavy duty hydraulic power to maintain constant cutting speeds and torque. With your choice of blade diameter – 14”, 16”, 20” or 24” – there’s no job, or direction, that can’t be handled with a saw that gives more power and longevity than the competitor’s gas, air or electric-powered saw.

HydraSaws

RGC HydraSaws can be used in any orientation – vertical, horizontal and everything in between. Cut floors and walls with equal ease thanks to RGC HydraSaws. With your choice of blade diameter – 14”, 16”, 20” or 24” – there’s no job, or direction, that can’t be handled with a saw that gives more power and longevity than the competitor’s gas, air or electric-powered saw.

RGC Hydrasaw Wall guide kit in use

HydraSaw Accessories

HydraSaws Features & Benefits

  • 14 in., 16 in., 20 in. and 24 in. models available.
  • Cut concrete, stone, brick, block, pipe reinforced concrete and steel beams quickly and cleanly.
  • Cutting depths of 5.25 in. to 9.5 in.
  • Heavy duty hydraulic motor provides constant cutting speed under load.
  • Heavy duty guard and trigger lockout safety feature protect the operator.
  • Lightweight, rugged steel tube construction is lighter than gas saws.
  • Cuts vertically, horizontally and underwater.
  • Dual-function trigger for automatic wet cutting.
  • Accepts abrasive or diamond blades.
  • Wall Mounted HydraSaw Guide available.
  • Use inside or outside with no exhaust pollutants.
  • The HydraCart and SawCart are available for floor and slab cutting

HydraSaw Specs

HydraSaws
Model S14 S16 S20 S24
Part # 2001400 2001600 2002000 2002400
Blade Size 14 in. (35.5 cm) 16 in. (40.6 cm) 20 in. (50.8 cm) 24 in. (61.0 cm)
Cutting Depth 5.25 in. (13.3 cm) 6 in. (15.2 cm) 7.5 in. (19 cm) 9.5 in. (24 cm)
Blade Speed 4100 rpm 2750 rpm 1830 rpm 1455 rpm
Flow 5-8 gpm (20-30 lpm) 5-8 gpm (20-30 lpm) 5-8 gpm (20-30 lpm) 5-8 gpm (20-30 lpm)
Pressure Range 2000 - 2500 psi (138 - 172 bar) 2000 - 2500 psi (138 - 172 bar) 2000 - 2500 psi (138 - 172 bar) 2000 - 2500 psi (138 - 172 bar)
Weight 28 lbs. (12.7 kg) 39 lbs. (17.7 kg) 52 lbs. (23.6 kg) 54 lbs. (24.5 kg)

FS20 Flush Cut Saw

The RGC FS20 Flush Cut Saw uses hydraulic direct drive power to maintain constant cutting speeds and torque without belts, pulleys, excessive noise or exhaust fumes. The FS20 hydraulic system is low maintenance.

With the FS20 Flush Cut Saw it is possible to cut flush with a perpendicular surface making it ideal for wall corner cuts. Use it with the Upright Handle attachment for easy wall cutting at floor level. This set up is also the right choice for curb cutting.

Flush Cut Saw RGC Construction

FS20 Flush Cut Saw Accessories

FS20 Features & Benefits

  • Cutting depth up to 8 in.
  • Cuts flush to perpendicular surfaces, such as walls and curbs.
  • Cuts vertically, horizontally and underwater.
  • Cut concrete, reinforced concrete, aggregate, stone, brick, block, pipe and steel beams quickly and cleanly.
  • Heavy duty hydraulic motor provides constant cutting speed under load.
  • Modular frame design permits easy replacement of parts.
  • Lightweight, rugged steel tube construction is lighter than gas saws.
  • Dual-function trigger for automatic wet cutting.
  • Accepts abrasive or diamond blades.
  • Use inside or outside with no exhaust pollutants when powered with an electric power pack.
  • Heavy duty guard for flush cutting and guard attachment for normal cutting are standard features.

FS20 Flush Cut Saw Specs

FS20 Flush Cut Saw
Model FS20
Blade Size 20 in. (50.8 cm)
Cutting Depth 8 in. (20.3 cm)
Blade Speed 1830 rpm
Flow 8 gpm @ 50 psi (30 lpm)
Pressure Range 2000 - 2500 psi (138 - 172 bar)
Weight 38 lbs. (17.2 kg)

HydraCart

RGC’s HydraCarts allow easier maneuverability along low surfaces. For light duty straight-line cutting or for bigger, heavier work.

RGC Hydracart with Hydrasaw

HydraCart Features & Benefits

  • Ideal for continuous and straight cutting in roadways, driveways, sidewalks and warehouse floors.
  • Cart mounting for precise control and less operator fatigue.
  • Rugged one piece steel frame construction.
  • Folding handles and removeable ballast box for easy transporting.
  • Control console at operator’s fingertips, includes depth-of-cut indicator and locking device.
  • HydraCart accommodates 14 in., 16 in., 20 in. and 24 in. HydraSaw models.

SawCart

RGC SawCarts are for light duty straight linecutting. Can be used with 14 in. and 16 in. HYDRASAWS.

RGC Saw Cart with hydrasaw

SawCart Features & Benefits

  • Ideal for continuous and straight cutting in roadways, driveways, sidewalks and warehouse floors.
  • Cart mounting for precise control and less operator fatigue.
  • Rugged one piece steel frame construction.
  • Folding handles and removable ballast box for easy transporting.
  • Control console at operator’s fingertips, includes depth-of-cut indicator and locking device.
  • The light duty Saw Cart is available for 14 in. and 16 in. HydraSaw models.