CORE DRILLS & PUMPS

HYDRAULIC TOOLS / Accessories

Hydraulic Pumps & Core Drills

Get full use of your hydraulic power supply with Water and Trash Pumps, Core Drills and Hydraulic Hoses available from RGC.

Have a question about one of our products?

Core Drills

As the leading supplier and manufacturer of core drills, RGC Construction is committed to providing you with reliable and hardworking hydraulic tools that can handle whatever you throw at them. Hydraulic Core Drills allow your crew to remove cores of material perfect for drilling a core to test the density of concrete or cutting holes for pipe installation. And with a powerful hydraulic motor, you’ll get more return on investment as the motor won’t burn out at the first challenging job.

Concrete core drilling machines are ideal for numerous industrial, construction, electrical and plumbing applications. Residential core drilling primarily consists of creating dryer vents, installing pipes and wires, or making drains for garages and driveways. Commercial applications include installing phone lines, creating utility holes and testing the strength of different materials. While electric core drills can form passageways in softer materials, the exceptional power of hydraulic core drills allows them to cut through concrete, asphalt, stone and more.

RGC Hydraulic Core Drill

 

 

Core Drills Features & Benefits

  • Efficient, precise drilling of holes 6 in. to 24 in. in diameter.
  • 2 sizes available: 6 in. to 16 in. or 18 in. to 24 in.
  • Sturdy drill stand ensures precise holes.
  • Constant hydraulic power with less noise and vibration.
  • Variable speed control.
  • Permits safe, easy, non-percussive drilling through concrete and aggregates with or without reinforcing.
  • Neat, clean and damage-free holes are the result of superior power, speed and hydraulic action.
  • Can be used under water.
  • Minimal maintenance and easy parts replacement.
  • Use with an RGC power pack or compatible hydraulic source.

Core Drills Specs

HydraCore Drill
ModelCD616CD1824*
Part #17150071715008
Flow Range8-15 gpm (30-57 lpm)8-15 gpm (30-57 lpm)
Pressure Range2000 - 2500 psi
(138-172 bar)
2000 - 2500 psi
(138-172 bar)
Speed330 rpm200 rpm
Weight158 lbs.
(72 kg.)
163 lbs.
(74 kg.)
Core Bit Diameter6-16 in. (15-41 cm)18-24 in. (45-61 cm)
Drive1-1/4 - 7 UNC1-1/4 - 7 UNC
*Unit will accept up to 27 in. tall core bits. Taller masts available for longer core bits

Browse Our Core Drill Accessories

Our hydraulic core drills are powerful and dependable tools perfect for heavy-duty applications. Look through our selection of core drill parts and accessories for even more versatility and ease of use. Our accessories include hydraulic hoses and hose whips so you can enjoy the freedom to move around the job site without carrying your HydraPak.

Download Core Drill Product Sheet:

RGC hydraulic core drill product sheet

Hydraulic Trash Pumps

Hydraulic Trash Pumps are compact submersible pumps designed to efficiently move large volumes of liquids that can contain sand, dirt and gravel. Trash pumps can handle liquid with up to 30% solids, require no priming and can run dry without damage to the pump. Also available: HYDRAULIC WATER PUMPS

RGC Hydraulic Trash Pump
RGC Hydraulic Trash Pump

HYDRAPUMP ACCESSORIES:

Download Hydrapump Product Sheet:

RGC HydraPump product spec sheet

Trash Pumps Features & Benefits

  • Totally submersible, lightweight and portable.
  • Self-priming and self-lubricating designs.
  • Best performance-to-weight ratio in the industry.
  • Do not require cooling and can be run dry.
  • Consistently pump large volumes of liquids.
  • Proven, durable design for years of use.
  • Ideal for pumping out vaults, trenches, ditches, ponds, tanks, pools, etc.
  • Favored in the agricultural, mining, utility, public works, construction and transportation industries.

RGC offers FLOW DIVIDERS which allow you to run RGC tools from an auxiliary power supply.

Trash Pump Specs

Trash Pump
ModelPT300PT400
Part #21030082187540
Pump Capacity475 gpm875 gpm
Flow7-11 gpm
(26-42 lpm)
7-9 gpm
(26-34 lpm)
Pressure2000 psi
(138 bar)
2000 psi
(138 bar)
OperationOpen CenterOpen Center
Lift (Max.)100 ft.45 ft.
Discharge Outlet3 in. (7.6 cm) Camlock4 in. (10.2 cm) Camlock
Pump Diameter16 in. (38 cm)19 in. (48 cm)
Semi-Solids (Max.)3 in. (7.6 cm)3 in. (7.6 cm)
Couplings1/2 in. HTMA Flush-Face1/2 in. HTMA Flush-Face
Weight30 lbs. (13.6 kg)59 lbs. (26.8 kg)
Backpressure should be measured at the pump before being used. Excessive backpressure will damage shaft seal and is not covered under warranty

Hydraulic Water Pump

Hydraulic Water Pumps  are lightweight submersible centrifugal pumps that require no priming and can run dry without damage to the pump. Hydraulic Water Pumps work in wet or dry conditions and remove water from damp sites more quickly than with electric without burning out the motor.

RGC Hydraulic Water Pump
RGC Hydraulic Water Pump

HYDRAPUMP ACCESSORIES:

Download Hydrapump Product Sheet:

RGC HydraPump product spec sheet

HydraPump Features & Benefits

  • Totally submersible, lightweight and portable.
  • Self-priming and self-lubricating designs.
  • Best performance-to-weight ratio in the industry.
  • Do not require cooling and can be run dry.
  • Consistently pump large volumes of liquids.
  • Proven, durable design for years of use.
  • Ideal for pumping out vaults, trenches, ditches, ponds, tanks, pools, etc.
  • Favored in the agricultural, mining, utility, public works, construction and transportation industries.

RGC offers FLOW DIVIDERS which allow you to run RGC tools from an auxiliary power supply. Available in 5, 8 or 10 gpm output settings with a maximum input of 21 gpm and 3500 psi.

 

HydraPump Specs

HydraPump
ModelPW200PW250PW300
Part #210201021275252150030
Pump Capacity250 gpm275 gpm500 gpm
Flow4 - 9 gpm
(15 - 34 lpm)
4 - 8 gpm
(15 - 30 lpm)
7 - 11 gpm
(26 - 42 lpm)
Pressure2000 psi
(138 bar)
2000 psi
(138 bar)
2000 psi
(138 bar)
OperationOpen CenterOpen CenterOpen Center
Lift (Max.)145 ft.145 ft.120 ft.
Discharge Outlet2 in. (5.8 cm) NPT (f)2.5 in. (6.4 cm) Camlock3 in. (7.6 cm) Camlock
Pump Diameter9.5 in. (24 cm)8 in. (20.3 cm)10 in. (25.4 cm)
Semi-Solids (Max.)---
Couplings1/2 in. HTMA Flush-Face1/2 in. HTMA Flush-Face1/2 in. HTMA Flush-Face
Weight12 lbs. (5.5 kg)12 lbs. (5.5 kg)21 lbs. (9.5 kg)
Backpressure should be measured at the pump before being used. Excessive backpressure will damage shaft seal and is not covered under warranty

GET IN TOUCH WITH A SALES REPRESENTATIVE